For System M.
Push-button with 1 to 4 operating buttons and status displays. In idle state, the surface of the push-button appears as a uniform plane. The inscription of the keys only becomes visible via the backlit symbols following activation. For this, you can use the enclosed prefabricated foils or the individual symbols with various motifs.
The position of the operating buttons varies depending on the selected number of operating buttons.

ETS device functions:
- Behaviour and brightness of the status displays
- Night mode: LEDs light up with reduced brightness
- Proximity function: The LEDs are only activated and the functions only become visible when approached.
With integrated bus coupler. The bus is connected using a bus connecting terminal.

KNX software functions:

2 programming options:
- Express setting: Calls up a pre-set configuration
- Advanced setting: Individual configuration

- switching
- toggling
- dimming (single/dual-surface)
- blind (single/dual-surface)
- pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation)
- pulse edges with 2-byte telegrams (distinction between short and long operation)
- 8-bit linear regulator
- scene retrieval
- scene saving
- disable functions

Technical Details

Downloads

User Guide

KNX- System M Push-button Pro-Operating instructions (EN) (Version 0)
KNX- Foil Set for KNX Push-Button Pro-Operating instructions (EN) (Version 0)
KNX- Dismantling Protection -Operating instructions (EN) (Version 0)

System User Guide

KNX- Push-button Pro-ETS Software Description (EN) (Version 0)

Software - ETS

MTN6180-03xx MTN6180-04xx Software ETS4-ETS5.x (knxprod) (Version V1.1)