Currency Displayed in
- 3 binary inputs
- 1 blinds output, 1 output "TRIAC" (heating)
- Switching of electrically-driven blinds, awnings and similar blinds for AC 230 V mains voltage
- Switching of electrothermal actuators
- Installation in appliance box to DIN 49073
- Connection with enclosed terminal
- Control of Venetian blinds, awnings and similar blinds
- Control of electrothermal actuators
- Three binary inputs for potential-free contacts, usable as extension inputs for local operation
- Supply via bus, no additional power supply necessary
- Blind position directly controllable
- Slat position directly controllable
- Feedback of movement status, blind position and slat position
- Forced position through higher-level controller
- Safety function: 3 independent wind alarms, rain alarm, frost alarm
- Sun protection function
- Switching operation or PWM operation
- Valve drives with characteristics opened or closed without power
- Overload-protected, short circuit-protected
- Protection against jamming valves
- Forced position
- Cyclical monitoring of the input signals configurable
PWM operation: electrothermal actuators only have the positions Open and Closed. In PWM operation, switch-on and switch-off during the drives cycle time achieves an almost constant behaviour.
Rated voltage: | AC 230/240 V ~, 50/60 Hz |
Switching voltage: | AC 250 V ~ |
Ambient temperature: | -5 ... +45 °C |
Storage/transport temperature: | -25 ... +70 °C |
Blinds output | |
Contact type: | µ |
Switching current AC1 (cos ? > 0.8): | 3 A |
Min. switching current AC: | 100 mA |
Motors (230 V): | 600 VA |
Heating output | |
Contact type: | semiconductor (triac), ε |
Switching current: | 5 ... 25 mA |
Switch-on current: | max. 600 mA (2 s) |
Number of drives per output: | max. 2 |
Control cable | |
Cable type: | YY6x0.6 |
Input type: | floating contact |
Total cable length: | max. 5 m |
Voltage satellite inputs: | approx. 5 V |
Dimensions (Ø x H): | 53 x 28 mm |
Connection: | screwles terminals @ 1 ... 2.5 mm² |
KNX supply: | DC 21 ... 32 V SELV |
Power consumption KNX: | max. 240 mW |
Connection, KNX: | terminal |
Approvals: | VDE |