Currency Displayed in
- For controllers with switching (2- and 3-point) or continuous output (0…10 V)
- Self-centring spindle adapter
- Gear unit can be disengaged to position the damper and for manual adjustment
- Stepping motor with electronic activation and cut-out
- Maintenance-free
- Intelligent adaptation of rotation angle, incl. feedback adjustment
- Free configuration using the CASE Drive PC tool
- Suitable for all fitting positions
Power Supply | |
Power supply 24 V~ | ±20%, 51...60 Hz |
Power supply 24 V= | ±20% |
Parameters | |
Angle of rotation | Max. 95° |
Admissible damper shaft | Ø 8...16 mm, □ 6,5...12.5 mm |
Admissible damper shaft (hardness) | Max. 300 HV |
Operating noise | < 30 dB (A) |
Response time | 200 ms |
Parameters - Positioner | |
Control signal y | 0...10 V, Ri > 100 kΩ |
Positional feedback signal y0 | 0...10 V; load > 10 kΩ |
Starting point U0 | 0 or 10 V |
Control span ΔU | 10 V |
Switching range Xsh | 200 mV |
Type | Rotational torque and holding torque (Nm) | Running time for 90° | Power consumption |
ASM105SF132 | 5 | 35/60/120 s | 5.0 W, 9.0 VA |
ASM115SF132 | 10 | 60/120 s | 4.8 W, 8.7 VA |